M20 Spherical Plain Bearing + Housing/Cup + Circlip Complete Kit

Description

A Complete kit with everything you need to create your own Top or Bottom wishbone including 1x each of:

GEG20C – M20 Spherical Plain Bearing – Teflon Lined

Internal Circlip

Machined Housing for Spherical Bearing

McGill GEK-T Teflon Lined Series Bearings have 3 components; the ball, the liner and the outer race. The ball is inserted into the body and the body is then swaged around the ball to lock it in and it is then loosened to allow it to move. The body is made from Carbon Steel, the ball is hard chrome plated. These bearings are ideal for use in areas which require a tight fitted ball. These bearings are ideal for use in areas where the joint is constantly in motion as the liner insures the ball moves freely without any knocking or play being induced. These are commonly used in motorsport and on industrial equipment. These joints do not require lubrication.

BALL:  52100 Bearing Steel  ~  Heat Treated  ~  Hard Chrome Plated  ~  Precision Ground

LINER: Teflon Liner between Ball and Body

BODY:  Carbon Steel ~  Heat Treated  ~  Protective Coated for Corrosion Resistance

EXCLUSIVE FEATURES:  Cost Effective  ~  Teflon Lined  ~  Maintenance Free  ~  Free UK 1st Class Postage

DIMENSIONS: Bore Hole: 20mm ~ Outer Diameter: 42mm  ~  Outer Diameter of Housing: 54.5mm ~ Width of the Ball: 25mm  ~  Width of the Casing: 16mm  ~  Misalignment Angle: 15 degrees

Radial Static Load : 127 KN​

HOUSING MATERIAL:  Mild Steel, Suitable for Welding  ~  Zinc Coated for Corrosion Resistance

HOUSING COMPATIBLE WITH:  GEK20T Spherical Bearings

HOUSING DESIGN:  Machined to be Within Excellent Tolerances to Ensure an Excellent Fit for the Bearing 

GEG-C Range – Ideal for Motorsport, Industrial or Marine Applications.

To complement these Bearings, we have a range of other products available in our online store. We supply hardware for most sizes of bearing.

*These items are designed for use in oval racing, these are not a press fitting and are therefore unsuitable for rally and road applications*

These spherical bearing housings have been designed to allow use of our bearings in a wishbone. The bearing slots into the housing and a circlip holds it in place. These housings are weldable, allowing them to be constructed in part of a wishbone affair.

*Please note: Care should be taken to ensure that the lipped section is acting in the direction against the main force attempting to pull the bearing out when the vehicle is in use. The circlip is only there to hold the self weight of the bearing. *

Ideal for Motorsport, Industrial or Marine Applications.

To complement these housings, we have a range of other products available in our online store.